Diseño de un proceso para la producción de abono orgánico a partir de lodos residuales generados en la PTAR del municipio de Funza, Cundinamarca.
Date
2022-02-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Fundación Universidad de América
Abstract
En la producción de abono orgánico, partiendo del lodo generado en la planta de tratamiento de aguas residuales del municipio de Funza-Cundinamarca, se llevó a cabo la caracterizaron fisicoquímica de los lodos obtenidos, para la selección del sistema adecuado se utilizó una matriz multicriterio “Pugh”, los criterios evaluados fueron: costos, eficiencia, área requerida y tiempo de retención de la materia. El proceso seleccionado es en reactor horizontal con volteo, donde se requieren agentes de carga para suplir las necesidades en el compostaje, para el diseño del proceso se aplicó el balance de materia que incluye variables como relación C/N y humedad del sistema. Durante la experimentación fueron analizadas las variables de temperatura, humedad, pH y cenizas al inicio y al final del proceso para la materia prima, el abono obtenido fue analizado en laboratorio externo donde se encontró que cumple con los requisitos especificados en la NTC 5167 (2011). Asimismo, para el agente de carga se realizó la caracterización por medio de revisión bibliográfica. Por otro lado, el escalamiento del prototipo a escala piloto de un reactor horizontal fue ejecutado con la finalidad de establecer sus dimensiones y especificaciones técnicas para la producción. En el análisis de costos de operación e inversión se incluyeron criterios como: ingresos, costos directos e indirectos, durante la relación Costo/Beneficio se identificó que el proyecto es viable.
Description
In the production of organic fertilizer, starting from the sludge generated in the wastewater treatment plant of the municipality of Funza-Cundinamarca, the physicochemical characterization of the sludge obtained was carried out, for the selection of the appropriate system a multicriteria matrix "Pugh" was used, the criteria evaluated were: costs, efficiency, required area and retention time of the material. The selected process is a horizontal reactor with overturning, where bulking agents are required to supply the composting needs. For the design of the process, the balance of matter was applied, which includes variables such as C/N ratio and humidity of the system. During the experimentation, the variables of temperature, humidity, pH and ash were analyzed at the beginning and end of the process for the raw material; the compost obtained was analyzed in an external laboratory where it was found to comply with the requirements specified in NTC 5167 (2011). Likewise, for the bulking agent, the characterization was carried out by means of a literature review. On the other hand, the scaling of the pilot scale prototype of a horizontal reactor was carried out in order to establish its dimensions and technical specifications for production. In the analysis of operating and investment costs, criteria such as income, direct and indirect costs were included, during the Cost/Benefit ratio it was identified that the project is feasible.
Keywords
Compostaje, Lodo residual, Reactor horizontal, Composting, Sewage sludge, Horizontal reactor, Tesis y disertaciones académicas
Citation
APA 7th - Cristancho Torres, A. C. (2022) Diseño de un proceso para la producción de abono orgánico a partir de lodos residuales generados en la PTAR del municipio de Funza, Cundinamarca. [Trabajo de grado, Fundación Universidad de América] Repositorio Institucional Lumieres. https://hdl.handle.net/20.500.11839/8843